Articles about "Builders"
Australian Plumbing Requirements and Standards for Installing Rainwater Tanks
Water authorities in Australia are tasked with delivering high-quality water that is safe to drink and use in cooking. To ensure water safety, property owners need to comply with certain requirements and stands when installing or plumbing in alternative water supplies like rainwater tanks. This article examines general requirements and standards when plumbing in a […]
Can You Bury Poly Water Tanks in the Ground?
Some people would like to bury their water tanks to either reduce their height or hide them completely from view. Unlike steel tanks which cannot be buried due to corrosive reasons, with a poly tank you have no such worries. This article will look at a few things you need to keep in mind if […]
Council Requirements for Water Tanks in New Homes
If you are building a new home in Adelaide region then it is important to understand your water supply requirements to your property. This includes meeting certain council requirements for rainwater storage and plumbing. So there are two main questions you that will need to answer: What are my council requirements for water tanks? […]
Help Property Owners Choose a Water Tank to Fit Space Limitations
When building a house, especially on a smaller lot, it might be difficult planning where to place a rainwater tank. Many builders will often just plonk in a storage tank in the most convenient location, below a downpipe on the outside of a house. Presenting a few options, however, to the property owner, shows an attention […]
How to Install Underground Poly Water Tanks
Underground water tanks are great if you want to harvest rainwater and not have valuable surface space being taken up. Team Poly’s underground water tanks are made in Australia according to a patented and leading German-engineered design that provides optimum strength and optional self-cleaning filter. Please refer to our underground tank installation guide for complete instructions. This article […]
Ideas for Hiding Rainwater Tanks on Properties
Operation securities (OPSEC) is a military term, and is a process that identifies useful information to opposing forces that should be hidden. One of the most rudimentary ideologies of OPSEC is to hide preparations so that others don’t have any clue what you are up to. While such is a remarkable notion, hiding important things […]
Narrow Water Tanks for Smaller Properties and Shrinking Lot Sizes
According to the 2016 State of the Land Report (PDF) submitted to Australia’s federal government by The Urban Development Institute of Australia (UDIA), lot sizes continued to fall in urban areas around Australia. Major cities and regions reported on (Sydney, South-East Queensland, Perth, Adelaide and Melbourne) are all, for the first time, now less an average of 500 […]
Installing Backflow Prevention Devices for Plumbed-in Rainwater Tanks
When plumbing in a rainwater tank, a typical setup is to connect mains water to it as a backup water supply. When your tank runs dry, a rainwater to mains water switch can flip over to your mains water so that toilets and washing can continue without issue. Connecting to your mains water supply means a licensed […]
Water Storage and Council Considerations for New Homes
If you are looking to install a rainwater tank in your new home, then you need to be aware to any requirements that your local council might have. Council requirements vary from one area to the next so it is something that you will need to verify. Council Requirement Considerations Firstly, councils often require […]
Stormwater Detention: Council Requirements for Residential and Property Development
Local councils require stormwater detention for residential development throughout many built-up areas in Australia. This article will look at why this is necessary in developed areas, general requirements you might need to meet, and how you can comply with water detention requirements. What is Stormwater Detention? As the number of residential homes increase and areas […]
