Articles about "choosing a tank"
AQUAPLATE® Steel in Rainwater Tanks
In our last article, we compared Poly Water Tanks with AQUAPLATE® Steel Tanks. In this article we look further into the features of AQUAPLATE® steel in rainwater tanks. History of AQUAPLATE® Steel Until recent decades, the most common material for rainwater tanks seen in the Australian outback were corrugated steel tanks. These tanks were often galvanised, which […]
Choosing a Suitable Rainwater Tank – Poly Tank Range of Models, Sizes and Styles
Modern waters tanks are available in a range of models, sizes and styles so that buyers can choose the right size and shape to fit in with their property and rainwater harvesting needs. Team Poly offer one of the most diverse range of poly water tanks: Round Tanks (545L to 50,050L) a traditional rounded corrugated look Boabab […]
Choosing a Location for Your Rainwater Tank
If you are you looking to purchase a rainwater tank, then you should have an understanding of what tank size you need. Once you have worked out how much rainwater you wish (and are able) to harvest, your next step will be identifying an appropriate location for a tank that size on your property. There are five […]
Can You Bury Poly Water Tanks in the Ground?
Some people would like to bury their water tanks to either reduce their height or hide them completely from view. Unlike steel tanks which cannot be buried due to corrosive reasons, with a poly tank you have no such worries. This article will look at a few things you need to keep in mind if […]
Australian Standards for Water Tanks and Tank Installations
Several important standards apply to rainwater tanks for manufacturing specifications, storing potable water, and plumbing in your tank. This article seeks to explain Australian Standards, who sets them, what they are and which ones you should look for when buying and plumbing in your rainwater tank. What Are Australian Standards? It might surprise some to […]
Deciding Between Multiple Water Tanks or One Large Tank?
When looking for a water tank, many consider buying just one to meet their needs. Yet, there are several reasons why getting two or more might be better. This article will explore reasons why you might wish to install multiple water tanks rather than one large tank or vice-versa. Factors to Consider When Choosing Choosing […]
Help Property Owners Choose a Water Tank to Fit Space Limitations
When building a house, especially on a smaller lot, it might be difficult planning where to place a rainwater tank. Many builders will often just plonk in a storage tank in the most convenient location, below a downpipe on the outside of a house. Presenting a few options, however, to the property owner, shows an attention […]
Galvanised Steel in Rainwater Tanks
In our last article, we compared Poly Water Tanks with Galvanised Steel Tanks. In this article we look further into the features of galvanised steel water tanks. Until recent decades, the most common material for rainwater tanks seen in the Australian outback were corrugated steel tanks. These tanks were often galvanised, which is a process […]
Establishing Rainwater Harvesting Capacity
What size rainwater tank do I need? Did you know 1mm of rain falling on 1m2 of your roof provides 1 litre of water in your tank? Using the average suburban roof of 200m2, if you receive 500mm of rain per year, then you will harvest 100,000L of rainwater (200m2 * 500mm = 100,000L). This is a […]
How to Install Team Poly’s Razor Slimline Tanks
When deciding the best location for your tank, keep in mind that the closer your tank is to your downpipe, the simpler it will be to install. Slimline tanks which are normally located alongside a house are therefore a good option, especially our Razor slimline tanks which are designed to be bracketed to your house […]
How to Spot a Cheap Water Tank from a Quality Tank
We have all experienced the salesman who will do or say almost anything to have us buy something. An often used phrase during their pitch is “higher quality”. It is heard so often, “high quality this” and “high quality that” such words often carry little to no substance. Yet, most of us are often willing […]
Narrow Water Tanks for Smaller Properties and Shrinking Lot Sizes
According to the 2016 State of the Land Report (PDF) submitted to Australia’s federal government by The Urban Development Institute of Australia (UDIA), lot sizes continued to fall in urban areas around Australia. Major cities and regions reported on (Sydney, South-East Queensland, Perth, Adelaide and Melbourne) are all, for the first time, now less an average of 500 […]
